DTC P0AE1-98: Hybrid/EV Battery Precharge Contractor Circuit - Component or system over temperature: Action
WARNING:
The PHEV battery pack casing must not be disassembled due to the risk of exposure to high voltage. Failure to comply with this instruction may result in personal injury or death.
- Using the Jaguar Land Rover approved diagnostic equipment, check the electric power inverter converter module for related DTCs and refer to the relevant DTC index
- Check the high voltage cables for damage. Disconnect the high voltage cables and measure the resistance between positive and negative. Install a new high voltage cable as necessary. If a short circuit is detected inside a high voltage component, raise a Technical Assistance (TA):
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Battery Energy Control Module (BECM)/ECU Functions/Prior Approval - Display Traction Battery Data
- Attach the Pathfinder session file using 'Pathfinder Sessions'
- Use the Diagnostic Trouble Code (DTC) as a reference number in the Customer Comments field
- Describe primary and secondary diagnostics completed
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Battery Energy Control Module (BECM)/Clear DTCs. Retest. If the fault persists, raise a Technical Assistance (TA):
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Battery Energy Control Module (BECM)/ECU Functions/Prior Approval - Display Traction Battery Data
- Attach the Pathfinder session file using 'Pathfinder Sessions'
- Use the Diagnostic Trouble Code (DTC) as a reference number in the Customer Comments field
- Describe primary and secondary diagnostics completed