LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1969 >> Commando 2.2L Eng >> Repair and Diagnosis >> Engine Performance >> Theory and Operation >> Exhaust Gas RECIRCULATION >> Maintenance & Testing >> CTO Switch
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

CTO Switch

Check vacuum lines for leaks and correct routing.

NOTE: Engine coolant temperature must be below 100°F to perform test.

Disconnect vacuum line at EGR valve and connect vacuum gauge to line. Operate engine at approximately 1500 RPM; no vacuum should be indicated on gauge. If vacuum is indicated, replace CTO switch. Operate engine until coolant temperature exceeds 115°F. Accelerate engine to 1500 RPM; carburetor ported vacuum should be indicated on vacuum gauge. If not replace CTO switch.

scientia non olet · About LEMON Manuals