October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Turning Angle Adjustment

The turning angle stop screws are located on back side of steering knuckle, just above axle centerline. To adjust, loosen lock nut on stop screw.
Using full-floating turn table under each wheel, adjust stop screw IN to increase turning angle and OUT to decrease turning angle. Tighten lock nut.

TURNING ANGLE ADJUSTMENT

Application	Left Wheel	Right Wheel
Grand Wagoneer & Trucks	36-37°	36-37°