LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1987 >> Cherokee Base, 2D Utility, 2.1 B >> Repair and Diagnosis (Single Page) >> Body & Frame >> Power Windows >> Testing >> Switch Up & Switch Down Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Switch Up & Switch Down Test

  1. Connect a jumper wire between Violet lead and switch "UP" terminal. Connect a second jumper wire between switch ground terminal and "DOWN" terminal. This will test up operation of switch.
  2. If motor runs, voltage is present to motor. Connect switch to multiple connector and operate switch. If motor fails to run, replace switch. Test all switches in this manner.
  3. To test down operation of switch, connect first jumper wire between Violet lead and switch "DOWN" terminal, and second jumper wire between switch ground terminal and "UP" terminal. Repeat tests on all switches. Results are the same as up test.
scientia non olet · About LEMON Manuals