LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1988 >> Wrangler Base, 4.2 C, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System - Solid State >> Description >> Resistance Wire
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Resistance Wire

A 1.3-1.4 ohm resistance wire is provided in the Red wire (ignition) circuit to reduce battery voltage to coil. The resistance wire is by-passed during starting, so that full battery voltage may be applied to coil. The by-pass is accomplished through "I" terminal of starter solenoid.

scientia non olet · About LEMON Manuals