October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Deadhead Pressure
- Relieve fuel pressure. See FUEL PRESSURE RELEASE. Connect a 0-60 psi (0-4.2 kg/cm2
) fuel pressure gauge to the pressure test port fitting on fuel rail.
- Remove fuel pump relay (located in power distribution center). Using a jumper wire, connect terminals No. 30 and 87. See Figure
. Note fuel pressure gauge, and momentarily pinch fuel return line.
- Fuel pressure should be at least 53 psi (3.7 kg/cm2
). DO NOT allow pressure to exceed 60 psi (4.2 kg/cm2
). Release fuel return line.