LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1994 >> Wrangler SE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starter >> On-Vehicle Testing >> Solenoid Test >> Continuity Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Continuity Test

  1. Disconnect wire from solenoid field coil terminal (large terminal connected to starter body). Using an ohmmeter, test for continuity between field terminal and solenoid terminal (small terminal). Continuity should exist.
  2. Test for continuity between solenoid terminal and solenoid housing. Continuity should exist. If continuity does not exist in either test, solenoid has open circuit. Replace solenoid.
scientia non olet · About LEMON Manuals