LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1997 >> Cherokee Country, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 4.0L >> Trouble Code Tests >> Test TC-25D - Idle Air Control Motor Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test TC-25D - Idle Air Control Motor Circuits

NOTE: Perform TEST TC-25A before proceeding. For connector terminal ID, see CONNECTOR IDENTIFICATION DIRECTORY. For component location see wiring diagram in the WIRING DIAGRAMS article.
  1. Turn ignition off. Disconnect Powertrain Control Module (PCM) connectors. Inspect connectors and terminals for damage. Repair connectors and terminals as necessary and perform TEST VER-2A. If connectors and terminals are okay, go to next step.
  2. Using an external ohmmeter, check resistance of IAC motor connector, driver No. 3 circuit (Brown/White wire) between IAC motor connector and PCM Black connector. If resistance is less than 5 ohms, replace PCM and perform TEST VER-2A. If resistance is 5 ohms or more, repair open driver No. 3 circuit and perform TEST VER-2A.