Test 14D - Bus Short To 5 Volts
- Turn ignition off. Using external ohmmeter, measure resistance between terminals No. 1 (Brown/White wire) and No.18 (Violet/Brown wire) on memory seat module connector. If resistance is less than 5 ohms, repair short between Brown/White wire and Violet/Brown wire. If resistance is 5 ohms or greater, go to next step.
- Measure resistance between terminals No. 1 (Brown/White wire) and No. 19 (White/Black wire) on memory seat module connector. If resistance is less than 5 ohms, repair short between Brown/White wire and White/Black wire. If resistance is 5 ohms or greater, replace memory seat module.
NOTE:
For connector terminal identification, refer to CONNECTOR IDENTIFICATION
. For wiring diagrams, refer to WIRING DIAGRAMS
. After each repair, perform TEST VER-1A
.
CAUTION:
Always turn ignition off prior to disconnecting any module connector.