Power Window Switch Test
NOTE:
The following test is for rear door power window switches. Front door power window switches are integral to door modules. For front door power window switch testing, see DOOR MODULE TEST
.
Disconnect negative battery cable. Remove rear power window switch from door trim panel. See POWER WINDOW SWITCH R & I . With switch in specified position, check switch continuity. See REAR POWER WINDOW SWITCH CONTINUITY . See Fig 1 . Replace switch as necessary. If switch is okay, go to POWER WINDOW MOTOR TEST .
REAR POWER WINDOW SWITCH CONTINUITY
| Switch Position | Check Between Terminals No. |
|---|---|
| All Positions | 3 & 6 |
| Off | 1 & 2; 4 & 5 |
| Up | 1 & 2; 5 & 6 |
| Down | 2 & 6; 4 & 5 |