Side View Mirror

SIDE VIEW MIRROR

REMOVAL

1. Remove the door trim panel.

Fig. 15:

2. Remove the screw attaching the mirror trim cover/speaker grille to the door inner panel (Fig. 15).
3. remove push-in fastener attaching trim cover to door inner panel (use special tool C-4829).
4. Disconnect the power mirror wire connector, if equipped.

Fig. 16:

5. Remove the screws attaching the mirror to the door (Fig. 16).
6. Separate the mirror from the door.

INSTALLATION

1. Position the mirror on the door (Fig. 16).
2. Install the screws attaching the mirror to the door.
3. Connect the power mirror wire connector, if equipped.
4. Install new push-in fastener.
5. Install the mirror trim cover/speaker grille (Fig. 15).
6. Install the door trim panel.