System Features
- Range of Adjustment: The pedals may be adjusted up to 3 in. (75 mm)
- Pedal Adjustment Speed: 0.5 in./sec (12.5 mm/sec)
- Pedal Adjustment Inhibitors: Pedal adjustment is inhibited when the vehicle is in reverse or when cruise control is activated.
- Memory: An optional memory feature is available. This allows storing of one or two preferred pedal positions in the Adjustable Pedal Module (APM).
- A preferred position can be stored and recalled using the door-mounted switches.
- The door-mounted switches activate the Driver Door Module (DDM). The DDM instructs the APM via the PCI bus to store the current pedal position.
- A stored pedal position can be recalled (but not stored) using the Remote Keyless Entry (RKE).
- Adjustable Pedal Feedback Message: The Electronic Vehicle Information Center (EVIC) will display a message when the APS is disabled. ie: "Adjustable Pedal Disabled-Cruise Control Engaged" or "Adjustable Pedal Disabled-Vehicle in Reverse".
- Damage Prevention: Foot pressure or debris can stall pedal adjustment. In order to avoid damage to system components during pedal adjustment, the APM will monitor pedal position sensor voltage. If the APM does not detect expected voltage change within 1.5 seconds, it will cut power to the adjustable pedal motor.