Intake Manifold

LOWER INTAKE MANIFOLD

Fig. 95 Lower Intake Manifold Tightening Sequence:

Install and tighten intake manifold fasteners to 28 Nm (250 in. lbs.) in the sequence shown in (Fig. 95). Repeat procedure until all bolts are at specified torque.

UPPER INTAKE MANIFOLD

Fig. 94 Upper Intake Manifold Tightening Sequence - 2.4L:

Install upper intake manifold and tighten fasteners to 28 Nm (250 in. lbs.) in sequence shown in (Fig. 94). Repeat this procedures until all fasteners are at specified torque.