LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Grand Cherokee Limited, 4.7 N, AWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> BARTEC TPMS Reset Procedure >> BARTEC TPMS Reset Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BARTEC TPMS Reset Procedure

  1. Inflate all tires to pressure listed on tire placard.
  2. Turn ignition to ON/RUN position (engine off).
  3. Press and release the MENU button on the overhead console until the message RETRAIN TIRE SENSOR-NO is displayed.
  4. Press the STEP button to select YES.
  5. Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
  6. Starting at LF tire, place relearn magnet over valve stem until horn sounds.
  7. After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (if equipped).
  8. Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.
scientia non olet · About LEMON Manuals