LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Grand Cherokee Overland >> Repair and Diagnosis >> Steering >> Steering Linkage >> Steering System Linkage >> Drag Link >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drag Link: Installation

  1. Screw the tie rod ends into the adjustment sleeve.
  2. Install the drag link onto the right steering knuckle and pitman arm.
  3. Tighten the nut at the steering knuckle to 47 N.m (35 ft. lbs.). Tighten the pitman nut to 88 N.m (65 ft. lbs.). Install new cotter pins.
  4. Position clamp bolts to their original position and tighten to 41 N.m (30 ft. lbs.).
  5. Install right wheel and tire assembly.
  6. Remove support and lower the vehicle.
  7. Center the steering wheel.
scientia non olet · About LEMON Manuals