LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Liberty 2WD V6-3.7L VIN K >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Transmission and Drivetrain >> System Specifications
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

System Specifications



Clutch Volume Index (CVI)

The LR clutch volume is updated when doing a manual downshift into 1st gear with vehicle speed above 40 km/h (25 mph) and throttle angle below 5 °. The transmission temperature must be above 43 °C (110 °F).

The clutch volume should be between 45 and 134.

NOTE: You must manually move the shift lever into the low position.

The 2C clutch volume is updated when doing a 3-2 shift with throttle angle between 10 ° and 54 °. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 25 and 85.

The 2CA clutch volume is updated when doing a 4th-4 prime shift with throttle angle between 10 ° and 54 °. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 25 and 85.

The OD clutch volume is updated when doing a 2-3 shift with throttle angle between 10 ° and 54 °. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 30 and 100.

The 4C clutch volume is updated when doing a 3-4 shift with throttle angle between 10 ° and 54 °. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 30 and 85.

The UD clutch volume is updated when doing a 4-3 shift with throttle angle between 10 ° and 54 °. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 30 and 100.