LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Liberty Limited, 4WD, Part Time, 42RLE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.7L Engine >> Oil Pressure Sensor/Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oil Pressure Sensor/Switch: Installation

  1. Install oil pressure sender.
  2. Connect oil pressure sender wire.
  3. Install front splash shield.
  4. Lower vehicle.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals