LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Wrangler SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Electronic Control Modules) >> Controller Anti-Lock Brake >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Controller Anti-Lock Brake: Installation

WARNING: This page is about a different car, the 2004 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install CAB to the HCU.
  2. Install mounting bolts. Tighten to 2 N.m (16 INCH lbs.).
  3. Install the pump electrical connector to the CAB.
  4. Install the wiring harness connector to the CAB and push down on the release to secure the connector.
  5. Install negative battery cable to the battery.
scientia non olet · About LEMON Manuals