Hard Wired Inputs

The hard wired inputs to the BCM include the following:

• A/C switch signal
• Ambient temperature sensor signal
• Body control module flash enable
• Coolant level switch sense
• Door ajar switch sense (two circuits - one left rear, and one right rear)
• Driver seat heater switch mux
• Fog lamp switch sense
• Fused ignition switch output (run-acc)
• Fused ignition switch output (st-run)
• Ground (five circuits - two Z1, and three Z2)
• Hazard switch sense
• Headlamp switch mux
• High beam switch sense
• Hood ajar switch sense (export)
• Key-in ignition switch sense
• Liftgate ajar switch sense
• Liftgate courtesy disable
• Liftgate flip-up ajar switch sense
• Panel lamps dimmer signal
• Park lamp relay output
• Passenger seat heater switch mux
• PCI bus
• Radio control mux
• Rear window defogger switch sense
• Seat belt switch sense
• Ultralight sensor signal
• Washer fluid switch sense
• Washer pump switch sense
• Windshield wiper switch mux
• Wiper park switch sense