Ambient Temperature Sensor: Installation
WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the ambient temperature sensor onto the headlamp mounting module.
- Install and tighten the one screw that secures the ambient temperature sensor bracket to the headlamp mounting module. Tighten the screw to 2.2 N.m (20 in. lbs.).
- Reconnect the wire harness connector to the ambient temperature sensor connector receptacle.
- Install the radiator grille fascia and insert onto the headlamp mounting module. Refer to EXTERIOR for the procedures.
- Reconnect the battery negative cable.