VTSS Will Not Arm
WARNING: This page is about a different car, the 2002 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes:
- Check The VTSS Status
- Check For DTC's And VTSS Arming Inhibitors
- Body Control Module
Testing
- With the DRBIII(R), check that the Theft Alarm is enabled. Was the Theft Alarm enabled? If yes, go to next step. If no, with the DRBIII(R), enable the Vehicle Theft Security System VTSS. Perform VTSS VERIFICATION TEST .
- Ensure the tailgate, flip-up glass and all doors are closed. With the DRBIII(R), read the active DTC's and the ajar switch states. Does the DRBIII(R) display any closed switches or VTSS related DTC's? If yes, see DOOR AJAR or VEHICLE THEFT/SECURITY for related problems. Perform VTSS VERIFICATION TEST . If no, replace the Body Control Module. Perform BODY VERIFICATION TEST .