LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Power Distribution) >> Junction Block >> Installation >> RHD
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Junction Block: Installation: RHD

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the junction block and install the four junction block retaining screws.
  2. Install the upper and forward most group of relays in the junction block.
  3. Install the two ground wires on the right lower kick panel area.
  4. Working through the steering column opening cover, install the three bulkhead and two body controller electrical connectors on the junction block assembly.
  5. Install the courtesy lamp under the right side of the instrument panel.
  6. Install the right cowl trim panel on the vehicle (Refer to INTERIOR ).
  7. Install the steering column opening cover (Refer to INSTRUMENT PANEL ).
  8. Install the right outboard trim bezel on the instrument panel.
  9. Install the right end cap on the instrument panel.
  10. Connect the negative battery cable.
scientia non olet · About LEMON Manuals