LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Power Distribution) >> Power Distribution Center >> Assembly >> Power Distribution Center Assembly >> Relay Wedge >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relay Wedge: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. From the top of the PDC housing, align and insert the PDC relay wedge latch arms into the correct cavities in the relay cassette.
  2. Gently and evenly press the PDC relay wedge down into the relay cassette until both of the latches are fully engaged.
  3. Install each of the removed relays into the proper cavities of the PDC relay wedge.
  4. Install the PDC housing lower cover.
scientia non olet · About LEMON Manuals