LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Power Door Lock System & Remote Keyless Entry System) >> Component Tests >> Flip-Up Glass Release Switch
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Flip-Up Glass Release Switch

WARNING: This page is about a different car, the 2002 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove tailgate trim panel. See TAILGATE TRIM PANEL  in REMOVAL & INSTALLATION.
  3. Disconnect the wire harness connector.
  4. Using an ohmmeter, check for continuity between the pins of the wire harness connector while pulling on the tailgate handle.
  5. If no continuity is found, replace the tailgate handle assembly. Refer to TAILGATE EXTERIOR HANDLE in REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals