LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Liberty Renegade, 4WD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Body Control Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Body Control Module: Installation

  1. If the vehicle is equipped with the optional remote keyless entry (RKE) system, reinstall the RKE module into the body control module (BCM). See POWER DOOR LOCKS & REMOTE KEYLESS ENTRY SYSTEM article.
  2. Position the BCM onto the junction block (JB).
  3. Install the screws that secure the BCM to the JB. Tighten the screws to 2.2 N.m (20 in. lbs.).
  4. Reinstall the junction block module (JBM) onto the instrument panel end bracket. See JUNCTION BLOCK  .
  5. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals