LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel System >> Fuel Level Sending Unit/Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Level Sending Unit/Sensor: Installation

  1. Connect necessary wiring into electrical connectors. Connect 4-wire connector to upper section of pump module.
  2. Position sending unit to pump module. Slide and snap into place.
  3. Install lower section of fuel pump module. Refer to FUEL PUMP MODULE .
scientia non olet · About LEMON Manuals