LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine Coolant Temperature Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Coolant Temperature Sensor: Installation

  1. Apply sealant to sensor threads (new replacement sensors will have sealant already applied).
  2. Install coolant temperature sensor into thermostat housing. Tighten to 11 N.m (8 ft. lbs.) torque.
  3. Connect wire connector.
  4. Fill cooling system. See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals