LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Wrangler Sport, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Level Sending Unit / Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Level Sending Unit / Sensor: Installation

  1. Position sending unit to pump module and snap into place.
  2. Connect electrical connector to terminals.
  3. Install fuel pump module. See FUEL PUMP MODULE .Refer to Fuel Pump Module Removal/Installation.
  4. Install fuel tank. See FUEL TANK .
scientia non olet · About LEMON Manuals