LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2005 >> Liberty Limited, 2.8 5, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - 2.8L Diesel >> Boost Pressure Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Boost Pressure Sensor: Installation

  1. Install sensor and retaining bolts into cylinder head cover/intake manifold. See Figure. Torque to 5.4 N.m (48 in. lbs.).
  2. Connect sensor electrical connector. See Figure.
  3. Install engine cover and bracket assembly (Refer to INSTALLATION (2.4L) or INSTALLATION (2.8L) or INSTALLATION (3.7L)).
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals