LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Pump >> Pump >> Installation >> 2.4L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering System: Pump: Pump: Installation: 2.4L

  1. Install pulley on pump. (Refer to STEERING/PUMP/PULLEY - INSTALLATION) .
  2. Install pump on the engine mounting bracket.
  3. Tighten pump bracket bolts to 47 N.m (35 ft. lbs.).
  4. Install 3 pump mounting bolts and tighten to 27 N.m (20 ft. lbs.).
  5. Install the pressure line on the pump and tighten to 28 N.m (21 ft. lbs.).
  6. Install return hoses on pump.
  7. Install drive belt. (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
  8. Add power steering fluid, refer to POWER STEERING PUMP - INITIAL OPERATION .
scientia non olet · About LEMON Manuals