Air Temperature Sensor ( Ambient / Intake ): Service and Repair

REMOVAL




The intake manifold air temperature (IAT) sensor) is installed into the air inlet tube.

1. Disconnect electrical connector from IAT sensor.
2. Clean dirt from air inlet tube at sensor base.
3. Gently lift on small plastic release tab (3) and rotate sensor about 1/4 turn counter-clockwise for removal.
4. Check condition of sensor O-ring (2).

INSTALLATION
1. Check condition of sensor O-ring (2).
2. Clean sensor mounting hole in intake manifold.
3. Position sensor into intake manifold and rotate clockwise until past release tab.
4. Install electrical connector.