LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Overhead Console >> Sensor-Ambient Air Temperature >> Diagnosis And Testing >> Ambient Temperature Sensor >> Sensor Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Test

  1. Turn the ignition switch to the Off position. Disconnect and isolate the battery negative cable. Disconnect the ambient temperature sensor harness connector.
  2. Measure the resistance of the ambient temperature sensor. At - 40° C (- 40° F), the sensor resistance is 336 kilohms. At 55° C (130° F), the sensor resistance is 2.488 kilohms. The sensor resistance should read between these two values. If OK, refer to SENSOR CIRCUIT TEST . If not OK, replace the inoperative ambient temperature sensor.