Stabilizer Bar: Installation

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Stabilizer Bar Bracket To Frame

Courtesy of CHRYSLER LLC

1 - STABILIZER BAR

2 - RETAINER BRACKET

3 - BUSHING

Install the stabilizer bar (1) to the vehicle.
Install the stabilizer bushing clamp (2) and tighten the bolts to 129N.m ( 95 ft. lbs.).

Fig 2: Identifying Stabilizer Link, Tie Rod End & Clevis Bolt
Courtesy of CHRYSLER LLC
Install the upper stabilizer link (3) and tighten nut (1) & bolt (2) to 108 N.m (80 ft. lbs.).
Install the front splash shield.
Lower the vehicle.