LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Suspension System) >> Rear >> Stabilizer Link >> Installation >> Base
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stabilizer Link: Installation: Base

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the upper bolt for the stabilizer link to the frame and tighten to 102 N.m (75 ft. lbs.).
  2. Install the stabilizer link to the stabilizer bar.
  3. Install the nut and tighten to 88N.m (65 ft. lbs.).
  4. Remove the jack and lower the vehicle.
scientia non olet · About LEMON Manuals