Fuel Injection - Gas: Sensor-Map: Installation: 5.7L

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAP Sensor Location - 5.7L

Courtesy of CHRYSLER LLC

Clean MAP sensor mounting hole at intake manifold.

Fig 2: Removing/Installing MAP Sensor - 5.7L
Courtesy of CHRYSLER LLC
Check MAP sensor O-ring seal for cuts or tears.
Position sensor into manifold (2). See Fig 2.
Rotate sensor 1/4 turn clockwise for installation (3). See Fig 2.
Connect electrical connector.