Switch-Speed Control: Removal
WARNING:
Before attempting to diagnose, remove or install any airbag system or related steering wheel and steering column components you must first disconnect and isolate the negative (ground) battery cable. Wait 2 minutes for system capacitor to discharge before further system service. Failure to do so could result in accidental deployment and possible personal injury. Refer to the RESTRAINTS - SERVICE INFORMATION
article.
- Disconnect and isolate negative battery cable from battery.
- Remove airbag module. Refer to the RESTRAINTS - SERVICE INFORMATION article.
- Unplug electrical connector.
- Remove speed control switch mounting screw (1) and remove switch from steering wheel.