LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Limited, 5.7 2, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Engine Control >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Module-Engine Control: Removal

Fig 1: ENGINE CONTROL MODULE (ECM) REMOVAL & INSTALLATION
GC0045388Courtesy of DAIMLERCHRYSLER CORP.
1 - ECM ELECTRICAL CONNECTORS
2 - ENGINE CONTROL MODULE (ECM)
3 - ECM MOUNTING BRACKET
4 - ECM MOUNTING BRACKET MOUNTING STUDS
5 - MOUNTING BRACKET RETAINING NUTS
  1. Disconnect negative battery cable.
  2. Disconnect Engine Control Module (ECM) electrical connectors (1).
  3. Remove ECM bracket to inner fender retaining nuts (5).
  4. Remove ECM and bracket assembly from vehicle.
  5. Separate ECM from bracket.
scientia non olet · About LEMON Manuals