Control Circuit Testing

The starter control circuit components should be tested in the order in which they are listed, as follows:

1. Starter Relay  - Refer to Starter Relay  under Diagnosis and Testing.
2. Starter Solenoid  - Refer to Starter Motor  under Diagnosis and Testing.
3. Ignition Switch  - Refer to Ignition Switch and Key Lock Cylinder 
4. Clutch Pedal Position Switch  - If equipped with manual transmission, refer to Clutch Pedal Position Switch  in CLUTCH .
5. Park/Neutral Position Switch  - If equipped with automatic transmission, refer to Park/Neutral Position Switch  in appropriate AUTOMATIC TRANSMISSION article.
6. Wire harnesses and connections  - Refer to SYSTEM WIRING DIAGRAMS article.