LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Antilock Brake >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Controller Antilock Brake: Removal

  1. Remove the negative battery cable from the battery.
  2. Pull up on the CAB harness connector release and remove connector. See Fig 1.
    Fig 1: CAB Harness Connector Release
    GC0029823Courtesy of DAIMLERCHRYSLER CORP.
    1 - ABS MODULE
    2 - ELECTRICAL CONNECTOR
  3. Remove the pump connector from the CAB.
  4. Remove the CAB mounting bolts.
  5. Remove the CAB from the HCU. See Figure.
scientia non olet · About LEMON Manuals