LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor Relay >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Motor Relay: Installation

  1. See fuse and relay layout label affixed to underside of PDC cover for proper starter relay location.
  2. Position starter relay in proper receptacle in PDC.
  3. Align starter relay terminals with terminal cavities in PDC receptacle.
  4. Push down firmly on starter relay until terminals are fully seated in terminal cavities in PDC receptacle.
  5. Close and latch PDC cover.
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals