LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Bushings >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Suspension System: Front: Bushings: Installation

  1. Place Receiver 7932-1 on the other side of the axle bracket.
  2. Position new bushing up to the axle bracket, and large end of Remover/Install 7932-2 against the bushing. See Fig 1.
  3. Install bolt 7604 through receiver, bushing and installer.
  4. Install Long Nut 7603 and tighten nut to draw the bushing into the axle bracket.
    Fig 1: Bushing Installation
    GC0029909Courtesy of DAIMLERCHRYSLER CORP.
    1 - REMOVER/INSTALLER
    2 - AXLE BRACKET
    3 - BOLT
    4 - RECEIVER
    5 - LONG NUT
  5. Remove tools and install the upper suspension arm.
scientia non olet · About LEMON Manuals