LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery - Diesel >> Sensor-Water In Fuel >> Removal >> Water In Fuel Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Water In Fuel Sensor

  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
    NOTE: Capture and store any fuel spillage in appropriate containers
  3. Disconnect the water in fuel (WIF) electrical connector.
  4. Remove the WIF sensor retaining screws.
  5. Twist the WIF sensor so the tabs clear the retaining bracket.
  6. Gently pry up on the sensor and remove.
scientia non olet · About LEMON Manuals