LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Sport, 4.7 P, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Heating System (Service Information) >> Heated Seats - Service Information >> Module-Heated Seats >> Removal >> Module, Heated Seat
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Module, Heated Seat

Fig 1: Locating Heated Seat Module
GC0045428Courtesy of CHRYSLER LLC
CAUTION: The Heated Seat Module mounting tabs can be damaged during module removal and installation. Use care to properly align tabs to prevent binding that could result in tab breakage.
  1. Position the right front seat to the full rearward position.
  2. Disconnect and isolate the battery negative cable.
  3. Disconnect the wire harness connector (2) from the heated seat module (3).
  4. Unsnap the heated seat module retaining clips from the mounting bracket (4).
  5. Remove the heated seat module (3) from the vehicle.
scientia non olet · About LEMON Manuals