LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Compass 2WD L4-2.4L VIN W >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Diagrams >> Diagnostic Aids >> Troubleshooting Tests >> Testing For Continuity
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Testing For Continuity






STANDARD PROCEDURE - TESTING FOR CONTINUITY




1. Remove the fuse (1) for the circuit being checked or, disconnect the battery.

2. Connect one lead of the ohmmeter to one side of the circuit being tested.

3. Connect the other lead to the other end of the circuit being tested. Low or no resistance means good continuity.
scientia non olet · About LEMON Manuals