Valve, Manifold Flow: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manifold Flow Valve Shaft Slot

Courtesy of CHRYSLER LLC

Make sure that slot in shaft is not damaged.

Fig 2: Manifold Flow Valve Flow Managment Valve Shaft
Courtesy of CHRYSLER LLC
Make sure that tab in valve is not damaged.

Fig 3: Manifold Flow Valve Mounting
Courtesy of CHRYSLER LLC
Align tab in valve with slot in intake manifold shaft (2) and rotate valve counterclockwise until valve drops onto location pin mounting (1).

Fig 4: Manifold Flow Valve Electrical Connector
Courtesy of CHRYSLER LLC
Install mounting bolts (1) and tighten to 6 N.m (53 in. lbs.).
Connect electrical connector (2).
Install air tube.
Connect negative battery cable.