LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Compass Sport, 2.4 W, AWD, Automatic CVT >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection-Gas >> Fuel Injector >> Standard Procedure >> Injector Connector
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Injector Connector

Fig 1: Fuel Injectors
GC0019464Courtesy of CHRYSLER LLC
  1. Disconnect electrical connectors at the fuel injectors.
    Fig 2: Remove/Install Injector Connector
    GC0006529Courtesy of CHRYSLER LLC
  2. To remove connector pull the red colored slider away from injector (1). While pulling the slider, depress tab (2) and remove connector (3) from injector. The factory fuel injection wiring harness is numerically tagged (INJ 1, INJ 2, etc.) for injector position identification. If harness is not tagged, make note of wiring location before removal.
scientia non olet · About LEMON Manuals