LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Wrangler Sahara, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Electronic Control Modules (Service Information)) >> Electronic Control Modules - Service Information >> Module-Powertrain Control >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Powertrain Control: Removal: Removal

WARNING: This page is about a different car, the 2007 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PCM Location - Left Hand Drive
GC0061538Courtesy of CHRYSLER LLC
Fig 2: PCM Location - Right Hand Drive
GC0061539Courtesy of CHRYSLER LLC
  1. The PCM (Powertrain Control Module) (3-Right Hand Drive), or (3-Left Hand Drive) is located in the engine compartment.
  2. Disconnect negative battery cable.
  3. Disconnect PCM electrical connectors (5-Right Hand Drive), or (4-Left Hand Drive).
  4. Remove PCM mounting screws (4-Right Hand Drive), or (5-Left Hand Drive).
  5. Remove PCM (3-Right Hand Drive), or (3-Left Hand Drive) from vehicle.
scientia non olet · About LEMON Manuals