LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Commander 4WD V6-3.7L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Outside Temperature Display >> Outside Temperature Display Sensor >> Service and Repair >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation







INSTALLATION

1. Position the ambient temperature sensor in the vehicle.
2. Secure the ambient temperature sensor into the retaining bracket.
3. Connect the wire harness connector to the ambient temperature sensor.
4. Install the grille, Grille - Installation.
5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals