Possible Causes
| Possible Causes |
|---|
| THROTTLE PLATE STUCK ABOVE LIMP HOME POSITION |
| TP SENSOR NO.1 AND TP SENSOR NO.2 BOTH READ 2.5 VOLTS |
| (K124) ETC MOTOR (+) CIRCUIT SHORTED TO VOLTAGE |
| (K124) ETC MOTOR (+) CIRCUIT OPEN |
| (K126) ETC MOTOR (-) CIRCUIT OPEN |
| (K124) ETC MOTOR (+) CIRCUIT SHORTED TO GROUND |
| (K126) ETC MOTOR (-) CIRCUIT SHORTED TO GROUND |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding.