LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Power Inverter Module - Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Inverter Module - Removal






REMOVAL

1. Disconnect the negative battery cable.




2. Remove the cup holder/bin (1) from the drivers side quarter panel (2).





3. Disconnect the harness push pins (1) from the power inverter bracket (2).





4. Remove the two forward retainers (1).





5. Remove the rear retainer (1).
6. Pull the power inverter up and disconnect the electrical connector.
7. Remove the power inverter from the mounting bracket.

scientia non olet · About LEMON Manuals